Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/71594
Título: | Challenges of 3d printed architectural ceramic components structures: controlling the shrinkage and preventing the cracking |
Autor(es): | Figueiredo, Bruno Cruz, Paulo J. S. Carvalho, João Moreira, João Pedro Oliveira |
Palavras-chave: | Ceramic 3D printing additive manufacturing parametric design ceramic retraction computational models Liquid Deposition Modelling shrinkage ceramic paste |
Data: | 2019 |
Editora: | International Association for Shell and Spatial Structures (IASS) |
Citação: | Figueiredo, Bruno Acácio Ferreira; Cruz, P.J.S.; Carvalho, João António Nogueira; Moreira, João Pedro Oliveira. “Challenges of 3d printed architectural ceramic components structures”. Paper presented in IASS Annual Symposium 2019 – Structural Membranes 2019, Barcelona, 2019. |
Resumo(s): | The use of ceramic materials in the additive manufacturing (AM) of architectural components has more and more examples and undeniably shows the potential of its application. However, one of the main characteristics inherent to this material, which happens in drying and firing phases, is the shrinkage of the material, which causes deformations and cracks in the surface of the produced elements. Thus, the shrinkage of the ceramic material may constitute an obstacle to the regular use of this material in the AM of architectural components. In this sense, it is important to study and point out ways and strategies to mitigate this drawback, making possible the correspondence between the final produced models and the digital ones in which they are based. This paper presents the main challenges and outcomes of several projects that use Liquid Deposition Modelling (LDM) of clay-paste as construction methodology. |
Tipo: | Artigo em ata de conferência |
URI: | https://hdl.handle.net/1822/71594 |
ISBN: | 9788412110104 |
DOI: | 10.6084/m9.figshare.14403194.v2 |
Versão da editora: | https://dx.doi.org/10.6084/m9.figshare.14403194.v2 |
Arbitragem científica: | yes |
Acesso: | Acesso aberto |
Aparece nas coleções: | EAAD - Artigos |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
2019_Challenges of 3d printed architectural ceramic components structures.pdf | 437,95 kB | Adobe PDF | Ver/Abrir |
Este trabalho está licenciado sob uma Licença Creative Commons