Masonry shear walls subjected to cyclic loading: influence of confinement and horizontal reinforcement

Abstract

The behavior of masonry shear walls is fundamental in the design of masonry buildings subjected to different actions, namely of seismic nature. The usage of unreinforced, confined or reinforced masonry is currently subjected to a strong debate in Europe due to the new codes. In particular, the part of Eurocode 8 (Design of structures for earthquake resistance) related to masonry structures is only a limited compromise for the different countries. A large testing program was started at University of Minho in order to clarify issues regarding confined masonry and unfilled vertical joints. Confined masonry is assumed as a hybrid material joining masonry with small section horizontal and vertical lightly reinforced concrete elements. This project, partly sponsored by the light-weight concrete block industry, aims at defining adequate structural solutions for regions of low to high seismicity in Portugal. This paper discusses the results of the experimental program, consisting mainly of masonry walls subjected to cyclic actions and constant pre-compression. Sixteen specimens are considered, being the shear strength, ductility, energy dissipation and stiffness discussed. The key aspects under discussion are: (a) the possibility of replacing the filling of the vertical joints by interlocking and horizontal bed joint reinforcement, (b) the need for filling vertical joints in confined masonry solutions.