Multi-objective design optimization of sandwich panel

Abstract

In the scope of an R&D project a new floor system based on sandwich panel has been developed. The lightweight structural system shall be a competitive solution when compared to traditional rehabilitation technique of degraded timber floors in old buildings. The layout of the sandwich prototypes designed involved the use of steel face sheet and i) steel webs and polyurethane (PUR) foam core system, ii) glass fiber-reinforced polymer (GFRP) webs and PUR foam core system and iii) outer steel webs and balsa wood core. The design of the sandwich panels included an optimization procedure. A multi-objective genetic algorithm (GA) was developed for this purpose as it is a search method well suited for the solution of optimization problems. The multi-objective GA aims at the minimization of the three objective functions, i.e. cost, mass and environmental footprint of the sandwich panel. The definition of the main feature of the algorithm includes consideration about encoding procedure, fitness scaling, selection method and handling of constraints. The boundary conditions are imposed so that the retrieved solutions will represent a feasible solution to the problem. These boundary conditions are the analytical formulation of the serviceability, ultimate limit state and thermal transmittance verifications imposed by the building codes to sandwich panels. The present paper deals with the introduction of all the aspects of the optimization problems providing as an example the optimization of the panel with steel face sheets, webs and PUR foam.