Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/71775| Título: | Modeling and simulation of the mechanical system to produce file cutting edges in an industrial machine |
| Autor(es): | Seabra, Eurico |
| Palavras-chave: | Mechatronics Instrumentation Kinematics Dynamics Mechanical design |
| Data: | Jul-2019 |
| Editora: | Gulustan-Bssjar |
| Revista: | Black Sea Scientific Journal of Academic Research |
| Citação: | Seabra, E. (2019). Modeling and Simulation of the Mechanical System to Produce File Cutting Edges in an Industrial Machine; In: Black Sea Scientific Journal of Academic Research – Multidisciplinary Journal 48(5), pp. 107-118 ISSN: 1987 - 6521, E – ISSN: 2346 – 7541. |
| Resumo(s): | This paper deals with the research on the mechanical system used to produce file cutting edges (or cutting teeth). A theoretical model was carried out to perform kinematic and dynamic motion characteristics of the mechanical system (cam-follower-spring) of the cutting file machine. With the intent to validate the theoretical model an industrial machine was appropriately re-designed and instrumented to obtain some experimental data. |
| Tipo: | Artigo |
| URI: | https://hdl.handle.net/1822/71775 |
| ISSN: | 1987-6521 |
| e-ISSN: | 2346-7541 |
| Arbitragem científica: | yes |
| Acesso: | Acesso restrito UMinho |
| Aparece nas coleções: | MEtRICs - Artigos em revistas internacionais/Papers in international journals |
Ficheiros deste registo:
| Ficheiro | Descrição | Tamanho | Formato | |
|---|---|---|---|---|
| BLACK SEA Journal_MODELING AND SIMULATION OF THE MECHANICAL SYSTEM TO PRODUCE FILE.pdf Acesso restrito! | Modeling and Simulation of the Mechanical System to Produce File Cutting Edges in an Industrial Machine | 575,83 kB | Adobe PDF | Ver/Abrir |
Este trabalho está licenciado sob uma Licença Creative Commons
