Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/69427| Título: | Cone geometry optimization and thermal behavior for lithium-ion battery separators |
| Autor(es): | Miranda, D. Gonçalves, Renato Ferreira Miranda, F. Vilhena, E. Lanceros-Méndez, S. Costa, Carlos Miguel Silva |
| Palavras-chave: | Separator Simulation Capacity Lithium ion battery lithium ion batttery |
| Data: | 2020 |
| Editora: | AIP Publishing |
| Revista: | AIP Conference Proceedings |
| Citação: | Miranda, D., Gonçalves, R., Miranda, F., Vilhena, E., Lanceros-Méndez, S., & Costa, C. M. (2020, November). Cone geometry optimization and thermal behavior for lithium-ion battery separators. In AIP Conference Proceedings (Vol. 2293, No. 1, p. 260006). AIP Publishing LLC |
| Resumo(s): | A 3D cone separator geometry for lithium-ion batteries has been optimized taking into account the increase of radius size of one side. Theoretical simulations have been carried out for evaluating the influence of radius size in the cone structure at different discharge rates (1 C and 60 C) in which it was also determined the produced ohmic heat. The value of the discharge capacity in the cone structure depends on the increases of the radius, which is correlated with the electrolyte volume and interface between free electrolyte/cathode. The optimum balance of these parameters is essential for obtaining higher battery performance through this geometry that can be used in the next generation of lithium-ion batteries |
| Tipo: | Artigo em ata de conferência |
| URI: | https://hdl.handle.net/1822/69427 |
| ISBN: | 9780735440258 |
| DOI: | 10.1063/5.0026453 |
| ISSN: | 0094-243X |
| Versão da editora: | https://aip.scitation.org/doi/abs/10.1063/5.0026453 |
| Arbitragem científica: | yes |
| Acesso: | Acesso aberto |
| Aparece nas coleções: | CDF - FCD - Comunicações/Communications (with refereeing) |
