Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/57766
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Boldt, R. | por |
dc.contributor.author | Carvalho, M. | por |
dc.contributor.author | Ferreira, F. | por |
dc.contributor.author | Carvalho, Helder | por |
dc.date.accessioned | 2019-01-03T21:28:47Z | - |
dc.date.available | 2019-01-03T21:28:47Z | - |
dc.date.issued | 2018 | - |
dc.identifier.citation | Boldt R., Carvalho M., Ferreira F., Carvalho, H. Pattern Design Methods for Non-Conventional Bodies, Aegean International Textile and Advanced Engineering Conference AITAE 2018, IOP Conference Series: Materials Science and Engineering, Volume 459, de 5 a 7 de Setembro de 2018, Lesvos, Grécia | por |
dc.identifier.issn | 1757-8981 | por |
dc.identifier.uri | https://hdl.handle.net/1822/57766 | - |
dc.description.abstract | The main goal of the study presented in this paper was to compare three different methodologies of pattern design methods. The case study was based on an individual body shape with a severe deformity in the spine with additional different measurements of the bust, waist and hip girths when compared with common standard measurement tables. This methodology comparison aims primarily to identify its performance regarding garment Fit and performance, in particularly, its potential related to electronic sensor integration for vital signals monitoring. Different performance results were obtained, with the best results obtained with the flat pattern block extracted from the 3D digital model surface methodology, followed by the flat pattern block using the studied individual personal measurements and the worst results obtained with the flat pattern block developed from a typical measurements table used by the industry and fashion schools. | por |
dc.description.sponsorship | This work is financed by Project “Deus ex Machina”, NORTE-01-0145-FEDER-000026, funded by CCDRN, through Sistema de Apoio à Investigação Cientifica e Tecnológica (Projetos Estruturados I&D&I) of Programa Operacional Regional do Norte, from Portugal 2020 and by FEDER funds through the Competitive Factors Operational Program (COMPETE) POCI-01-0145-FEDER-007136 and by national funds through FCT-Portuguese Foundation for Science and Technology, under the project UID/CTM/000264. | por |
dc.language.iso | eng | por |
dc.publisher | IOP Publishing | por |
dc.relation | UID/CTM/000264 | por |
dc.rights | openAccess | por |
dc.subject | patterns design | por |
dc.subject | 3D modeling | por |
dc.title | Pattern design methods for non-conventional bodies | por |
dc.type | conferencePaper | por |
dc.peerreviewed | yes | por |
dc.relation.publisherversion | http://iopscience.iop.org/article/10.1088/1757-899X/459/1/012091 | por |
oaire.citationConferenceDate | 2018 | por |
sdum.event.title | Aegean International Textile and Advanced Engineering Conference | por |
sdum.event.type | conference | por |
oaire.citationIssue | 1 | por |
oaire.citationConferencePlace | Lesvos, Grécia | por |
oaire.citationVolume | 459 | por |
dc.identifier.doi | 10.1088/1757-899X/459/1/012091 | por |
dc.subject.fos | Engenharia e Tecnologia::Outras Engenharias e Tecnologias | por |
dc.description.publicationversion | info:eu-repo/semantics/publishedVersion | por |
dc.subject.wos | Science & Technology | por |
sdum.journal | IOP Conference Series: Materials Science and Engineering | por |
sdum.conferencePublication | Aegean International Textile and Advanced Engineering Conference AITAE 2018, IOP Conference Series: Materials Science and Engineering, Volume 459, 5 | por |
Aparece nas coleções: | DET/2C2T - Comunicações em congressos internacionais com arbitragem científica |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Boldt_2018_IOP_PatternDesignMethods.pdf | 3,18 MB | Adobe PDF | Ver/Abrir |