Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/50782
Título: | Synthesis, characterization, and applications of polyolefin-polyamide micro- and nanofibrillar composites |
Autor(es): | Denchev, Z. Dencheva, Nadya Vasileva |
Editor(es): | Mishra Raghvendra Kumar Thomas Sabu Kallarikal Nandakumar |
Palavras-chave: | Polymer composites Polymer blends Polyamides Polyethylene Compression molding Electron microscopy Extrusion Mechanical properties Microfibrillar composites Structure-properties relationship Thermoplastic polymers X-ray scattering |
Data: | 2017 |
Editora: | Woodhead Publishing Limited |
Citação: | DENCHEV Z., DENCHEVA N. – Synthesis, Characterization and Applications of Polyolefin-Polyamide Micro- and Nanofibrillar Composites in: Science, Technology and Applications of Micro- and Nanofibrillar Composites, R. Mishra, S. Thomas, N. Kalarikkal (Eds), Elsevier Books 2017, Chapter 7, pp. 125-182 |
Resumo(s): | Blending of polyolefins and PAs has been shown to be a good way to make full use of the respective advantages of both thermoplastics [15]. Transforming PE/PA blends into MFC was therefore expected to lead to materials with interesting properties. The first goal of this chapter is to review the research on MFC systems based on PE/PA blends.Intensive research during the last decades revealed the big potential of the polymerbased hybrid composites. In them, a polymer matrix is reinforced by small amounts of layered clay materials, most often from the group of montmorillonites (MMT). Many thermoplastic or even thermoset polymers may be employed as matrix materials. Most of the works on polymer/clay hybrids were performed with polyamides. It seemed, therefore, logical to try to obtain MFC materials with PE matrix in which the reinforcing, in situ obtained PA fibrils were additionally strengthened by nanosized MMT filler. This would be an attempt to combine the strong points of conventional fibrous composites, the LCP and clay-reinforced polymer systems, avoiding some of their most important limitations. Therefore, it is the second goal of this chapter to review the research on such dually reinforced PE/PA microfibrillar systems. |
Tipo: | Capítulo de livro |
URI: | https://hdl.handle.net/1822/50782 |
ISBN: | 978-0-08-101991-7 |
e-ISBN: | 978-0-08-101992-4 |
DOI: | 10.1016/B978-0-08-101991-7.00007-8 |
Versão da editora: | https://www.elsevier.com/books/micro-and-nano-fibrillar-composites-mfcs-and-nfcs-from-polymer-blends/thomas/978-0-08-101991-7 |
Acesso: | Acesso aberto |
Aparece nas coleções: | IPC - Capítulos de Livros |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
BC10 Denchev ZZ_Dencheva NV - HDPE_PA MFC.pdf | 16,55 MB | Adobe PDF | Ver/Abrir |