Biomechanical and cellular segmental characterization of human meniscos: building the basis for Tissue Engineering therapies

Abstract

Objective To overcome current limitations of Tissue Engineering (TE) strategies, deeper comprehension on meniscus biology is required. This study aims to combine biomechanical segmental analysis of fresh human meniscus tissues and its correlation with architectural and cellular characterization. Method Morphologically intact menisci, from 44 live donors were studied after division into three radial segments. Dynamic mechanical analysis (DMA) was performed at physiological-like conditions. Micro-computed tomography (CT) analysis of freeze-dried samples assessed micro-structure. Flow cytometry, histology and histomorphometry were used for cellular study and quantification. Results Anterior segments present significantly higher damping properties. Mid body fresh medial meniscus presents higher values ofE′ compared to lateral. Cyclic loads influence the viscoelastic behavior of menisci. By increasing the frequency leads to an increase in stiffness. Conversely, with increasing frequencies, the capacity to dissipate energy and damping properties initially decrease and then rise again. Age and gender directly correlate with higherE’ and tanδ. Micro-CT analysis revealed that mean porosity was 55.5 (21.2–89.8)% and 64.7 (47.7–81.8)% for freeze-dried lateral and medial meniscus, respectively. Predominant cells are positive for CD44, CD73, CD90 and CD105, and lack CD31, CD34 and CD45 (present in smaller populations). Histomorphometry revealed that cellularity decreases from vascular zone 1 to zone 3. Anterior segments of lateral and medial meniscus have inferior cellularity as compared to mid body and posterior ones. Conclusion Menisci are not uniform structures. Anterior segments have lower cellularity and higher damping. Cyclic loads influence viscoelastic characteristics. Future TE therapies should consider segmental architecture, cellularity and biomechanics of fresh tissue.