Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/26620
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Camboa, André | - |
dc.contributor.author | Ribeiro, Bernardo Sousa | - |
dc.contributor.author | Nunes, J. P. | - |
dc.contributor.author | Alves, Jorge Lino | - |
dc.date.accessioned | 2013-12-03T15:24:28Z | - |
dc.date.available | 2013-12-03T15:24:28Z | - |
dc.date.issued | 2013-06-23 | - |
dc.date.submitted | 2013-02-28 | - |
dc.identifier.uri | https://hdl.handle.net/1822/26620 | - |
dc.description.abstract | Polydicyclopentadiene (PDCPD) is being used in several products with particular success regarding to weight reduction and surface finish improvement. Despite the enough good mechanical properties presented by this thermosetting polymer, it needs to be adequately reinforced in applications requiring extra structural stability. This work studies the improvement of mechanical properties that may be achieved in PDCPD components reinforced with over-moulded steel wires by using the reaction injection moulding (RIM). Specimens, with and without metal inserts, were produced by using a special dedicated developed prototype RIM mould to be submitted to three point bending test, according to EN ISO 178:2003 standard. This paper presents and discusses the results obtained from the flexural tests, which allow concluding that the solution could be industrially used in feasible and advantageous conditions. | por |
dc.description.sponsorship | Fundação para a Ciência e a Tecnologia (FCT) | por |
dc.description.sponsorship | Fundos FEDER, Programa Operacional para Fatores de Competitividade – COMPETE, projeto 13844 | por |
dc.language.iso | eng | por |
dc.publisher | Universidade do Porto. Faculdade de Engenharia (FEUP) | por |
dc.rights | openAccess | por |
dc.subject | Polydicyclopentadiene | por |
dc.subject | Over-moulding | por |
dc.subject | Metal inserts | por |
dc.subject | Flexural tests | por |
dc.title | A mechanical analysis of polydicyclopentadiene with metal inserts through flexural load | por |
dc.type | conferencePaper | - |
dc.peerreviewed | yes | por |
sdum.publicationstatus | published | por |
oaire.citationConferenceDate | 23-27 Junho 2013 | por |
sdum.event.type | conference | por |
oaire.citationConferencePlace | Funchal, Portugal | por |
oaire.citationTitle | 4th International Conference on Integrity, Reliability & Failure (IRF’ 2013) | por |
sdum.conferencePublication | 4th International Conference on Integrity, Reliability & Failure (IRF’ 2013) | por |
Aparece nas coleções: | IPC - Resumos alargados em actas de encontros científicos internacionais com arbitragem |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
A MECHANICAL ANALYSIS OF POLYDICYCLOPENTADIENE WITH METAL INSERTS THROUGH FLEXURAL LOAD.pdf | Documento principal | 351,02 kB | Adobe PDF | Ver/Abrir |