Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/23405
Título: | Otimização de locomoção bípede |
Autor(es): | Barbosa, Pedro Jorge Ribeiro |
Orientador(es): | Santos, Cristina |
Data: | 2012 |
Resumo(s): | Atualmente verifica-se um crescimento exponencial a nível de desenvolvimento
de sistemas robóticos móveis havendo um esforço para criar sistemas com
propriedades mais eficientes e adaptáveis às exigências do ambiente de trabalho.
Neste contexto, têm havido uma preocupação acrescida em desenvolver melhores
sistemas de locomoção quer seja locomoção por rodas quer seja por pernas (bípede,
quadrúpede e hexapode).
Esta dissertação foca-se na otimização da locomoção bípede a qual é uma área
que tem sido alvo de grande atenção uma vez que esta é uma área da robótica que
ainda necessita de progredir no sentido de conseguir finalmente uma locomoção tão
eficiente como a marcha humana.
Deste modo, a elaboração deste trabalho teve como objetivos principais a
criação de uma estratégia de otimização que combinasse a geração de padrões de
movimento através de geradores centrais de padrões (CPGs) com um algoritmo de
otimização evolucionário (Non-Dominated Sorting Genetic Algorithm ll). Essa estratégia
implicou a determinação de objetivos que correspondem a características da
locomoção bípede e que foram otimizados, sendo eles o deslocamento frontal, a altura
a que o pé levanta, a força de impacto entre os pés e o chão e a posição do centro de
massa.
Os resultados foram obtidos a partir de simulações na plataforma Webots para
o robô bípede Darwin-OP. Neste contexto, os resultados foram muito satisfatórios uma
vez que o algoritmo foi capaz de gerar locomoção estável e os objetivos propostos
foram otimizados. Foi feito também um estudo de sensibilidade que determinou a
existência de parâmetros de CPGs que apresentam uma forte correlação positiva com
as funções objetivos. Assim, os parâmetros Acompasso, frequência ω e ORoll influenciam
fortemente o deslocamento e a força de impacto e o parâmetro AhPitch influencia a
altura a que o pé levanta.
No futuro seria pertinente aplicar o algoritmo elaborado num robô bípede real
e conferir se consegue gerar uma locomoção eficiente em condições reais. Presently there is an exponential increase on the level of development of mobile robotic systems and so there is an effort to create systems with properties more efficient and adaptable to the demands of the work environment. In this context, there has been a heightened concern in developing better systems of locomotion either by wheels either by legs (bipedal, 4-legged or 6-legged). This dissertation focuses on the optimization of bipedal locomotion which is an area that has been the subject of much attention since this is an area of robotics that still needs to make progress towards finally achieving locomotion as efficient as the human gait. Thus, this work aimed to create an optimization strategy that combines the generation of movement patterns through central pattern generators (CPGs) with an evolutionary optimization algorithm (Non-Dominated Sorting Genetic Algorithm II). This strategy involved the determination of objectives that correspond to characteristics of bipedal locomotion and that have been optimized, namely the frontal displacement, the ground clearance, the impact force between the foot and the ground and the position of the center of mass. The results were obtained from simulations in Webots platform for the bipedal robot Darwin-OP. The results were very satisfactory since the algorithm was able to generate stable locomotion and the proposed objectives were optimized. We also made a sensitivity analysis that determined the existence of CPGs parameters that exhibit a strong positive correlation with the objective functions. Thus, the parameters Acompasso, the frequency ω and ORoll strongly influence the impact force and displacement as well as AhPitch influences the height to which the foot rises. In the future it would be appropriate to apply the developed algorithm in a real biped robot and check if it can generate an efficient locomotion in real conditions. |
Tipo: | Dissertação de mestrado |
Descrição: | Dissertação de mestrado integrado em Engenharia Biomédica |
URI: | https://hdl.handle.net/1822/23405 |
Acesso: | Acesso aberto |
Aparece nas coleções: | BUM - Dissertações de Mestrado |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Pedro Jorge Ribeiro Barbosa.pdf | 4,75 MB | Adobe PDF | Ver/Abrir |