Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/12678
Título: | Study on processing-microstructure-properties relationships of extruded profiles |
Autor(es): | Carneiro, O. S. Viana, J. C. Nóbrega, J. M. |
Palavras-chave: | Polymer extrusion Thermoplastic profiles Microstructure Mechanical properties Taguchi analysis |
Data: | 2006 |
Editora: | Maney Publishing |
Revista: | Plastics, Rubbers and Composites |
Resumo(s): | In the present work, a rectangular polypropylene profile was produced under different extrusion conditions, in order to identify the most relevant processing variables determining its microstructure and mechanical properties and to understand the relationships between them. A Taguchi design of experiments technique, considering two levels for each variable (operating conditions), was used to define the set of extrusion runs. The resulting plastic profiles were characterised according to their microstructure and mechanical properties. It was concluded that the most significant processing variable determining the mechanical properties of the extrusion profiles is the extrusion temperature and that the drawdown ratio controls the degree of molecular orientation of the profiles, and therefore, the extension of shrinkage after heating. |
Tipo: | Artigo |
URI: | https://hdl.handle.net/1822/12678 |
DOI: | 10.1179/174328906X103114 |
ISSN: | 1465-8011 1743-2898 |
Arbitragem científica: | yes |
Acesso: | Acesso restrito UMinho |
Aparece nas coleções: | IPC - Artigos em revistas científicas internacionais com arbitragem |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
13. Study on processing–microstructure– properties relationships of extruded profiles.pdf Acesso restrito! | 784,64 kB | Adobe PDF | Ver/Abrir |