Mostrar 1-20 de um total de 66 resultados.
próximo >
| Data | Título | Autor(es) | Tipo | Acesso |
| 2019 | Antifungal activity of ZnO thin films prepared by glancing angle deposition | Pereira-Silva, Patrícia; Costa-Barbosa, Augusto; Costa, Diogo Emanuel Carvalho, et al. | Artigo | Acesso aberto |
| 3-Nov-2023 | Application of self-sensing cement-stabilized sand for damage detection | Roshan, Mohammad Jawed; Abedi, Mohammadmahdi; Correia, A. Gomes, et al. | Artigo | Acesso restrito UMinho |
| 2006 | Assessing the influence of heat treatments on γ-TiAl joints | Guedes, A.; Pinto, A. M. P.; Vieira, M. F., et al. | Artigo em ata de conferência | Acesso aberto |
| Mar-2020 | Barium‐doped zinc oxide thin films as highly efficient and reusable photocatalysts | Jayakrishnan, Ampattu Ravikumar; Alex, Kevin V.; Tharakan, Anoja Tony, et al. | Artigo | Acesso restrito UMinho |
| 2004 | Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: state of the art and recent developments | Mano, J. F.; Sousa, R. A.; Boesel, L. F., et al. | Artigo | Acesso aberto |
| 2010 | Brazing Ti-47Al-2Cr-2Nb to Inconel 718 with different filler alloys: microstructural characterization of the interfaces | Guedes, A.; Mollaoglu, H.; Viana, F., et al. | Artigo em ata de conferência | Acesso aberto |
| 27-Mai-2022 | Cement mortars with ceramic molds shells and paraffin waxes wastes: physical and mechanical behavior | Cunha, Sandra Raquel Leite; Tavares, André Pinho; Aguiar, J. L. Barroso de, et al. | Artigo | Acesso aberto |
| 19-Abr-2011 | Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres | Pakravan, H. R.; Jamshidi, M.; Latifi, M., et al. | Artigo em ata de conferência | Acesso aberto |
| 2013 | Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres | Pakravan, H. R.; Jamshidi, M.; Latifi, M., et al. | Artigo em ata de conferência | Acesso restrito UMinho |
| Out-2004 | Changes in morphology of starch-based prothestic thermoplastic material during enzymatic degradation | Araújo, M. Alberta; Cunha, A. M.; Mota, M. | Artigo | Acesso aberto |
| Abr-2007 | Changes on surface morphology of starch based materials after enzymatic degradation | Araújo, M. Alberta; Cunha, A. M.; Mota, M. | Resumo em ata de conferência | Acesso aberto |
| Jan-2010 | Characterization of micro-mouldings at different processing conditions: microstructure and mechanical properties | Sepúlveda, A. T.; Sampaio, M.; Cortez, J., et al. | Outro | Acesso aberto |
| 13-Set-2021 | Compositional fluctuations mediated by excess tellurium in bismuth antimony telluride nanocomposite yields high thermoelectric performance | Chauhan, Nagendra S.; Pyrlin, Sergey V.; Lebedev, Oleg I., et al. | Artigo | Acesso aberto |
| 2014 | Compressive strength, microstructure and hydration products of hybrid alkaline cements | Abdollahnejad, Zahra; Hlavacek, Petr; Miraldo, Ségio, et al. | Artigo | Acesso aberto |
| 2017 | COST Action TU1404: recent advances of the Extended Round Robin Test RRT+ | Serdar, Marijana; Staquet, Stéphanie; Gabrijel, Ivan, et al. | Artigo em ata de conferência | Acesso restrito UMinho |
| 2017 | Durability of mortars with incorporation of phase change materials microcapsules | Cunha, Sandra Raquel Leite; Aguiar, J. L. Barroso de; Ferreira, V. M. | Artigo | Acesso aberto |
| Dez-2018 | Eco-concrete with incorporation of blast furnace slag as natural aggregates replacement | Senani, M.; Ferhoune, N.; Guettala, A., et al. | Artigo | Acesso aberto |
| 1999 | The effect of brazing temperature on the titanium/glass-ceramic bonding | Guedes, A.; Pinto, A. M. P.; Vieira, M. F., et al. | Artigo | Acesso aberto |
| Jan-2020 | Effect of high volume fly ash and metakaolin with and without hydrated lime on the properties of self-compacting concrete | Anjos, Marcos A. S.; Camões, Aires; Campos, Pedro, et al. | Artigo | Acesso restrito UMinho |
| Fev-2017 | Effect of sintering pressure on microstructure and mechanical properties of hot-pressed Ti6Al4V-ZrO2 materials | Madeira, S.; Pinto, A. M. P.; Rodrigues, L. C., et al. | Artigo | Acesso aberto |
